- OEKOTEX certification compatibility
- Corrosion resistance
- Different design capability
Brass flat metal backs are resistant to corrosion and suitable for use with thin fabrics. It is lighter than alloyed products. Assembly of polyester, wood, acrylic stones and so on can be applied on top of the upper part.
Brass flat metal backs consist of 1 piece.
Which is;
Brass flat metal backs itself
Application;
Applied on fabric by sewing
Measure ;
You can see the dimensions of brass rings produced in different sizes from the “dimensions“ tab on our the page.
Logo;
Logo cannot be made.
Feature;
For the desired colors, you can look at the coating chart and select.
For order and information supply, you can contact our customer representatives through the contact page and request samples before ordering.
| Dimensions - D (Outter Diameter) x H (Height) | |
| 5 mm Flat Metal Back - 4,81 mm x 3,70 mm | ✔ |
| 6 mm Flat Metal Back - 5,52 mm x 3,64 mm | ✔ |
| 8 mm Thin Legged Flat Metal Back - 8 mm x 5 mm | ✔ |
| 8 mm Flat Metal Back - 8,50 mm x 5,15 mm | ✔ |
| 10 mm Flat Metal Back - 9,70 mm x 5,50 mm | ✔ |
| 11 mm Flat Metal Back - 11 mm x 5,70 mm | ✔ |
| 13 mm Flat Metal Back - 13 mm x 5,80 mm | ✔ |
| 15 mm Flat Metal Back - 15,62 mm x 5,80 mm | ✔ |
| 16 mm Flat Metal Back - 16 mm x 5,94 mm | ✔ |
| 18 mm Flat Metal Back - 18 mm x 6,15 mm | ✔ |
| 23 mm Flat Metal Back - 23 mm x 6,90 mm | ✔ |
| 25 mm Flat Metal Back - 25,50 mm x 6 mm | ✔ |
| 28 mm Flat Metal Back - 28 mm x 7 mm | ✔ |
| 29 mm Flat Metal Back - 29 mm x 6 mm | ✔ |
| 32 mm Flat Metal Back - 32 mm x 7,30 mm | ✔ |
| 35 mm Flat Metal Back - 35 mm x 6,30 mm | ✔ |
| 9 mm Deep Metal Back - 9 mm x 5,30 mm | ✔ |
| 10 mm Deep Metal Back - 9,70 mm x 5,57 mm | ✔ |
| 12 mm Deep Metal Back - 12 mm x 6 mm | ✔ |
| 14 mm Deep Metal Back - 14,60 mm x 7 mm | ✔ |
| 18 mm Deep Metal Back - 18,64 mm x 7,74 mm | ✔ |
| 20 mm Deep Metal Back - 20 mm x 8 mm | ✔ |
| 25 mm Deep Metal Back - 25,50 mm x 8,52 mm | ✔ |